Leitfaden zur Beschaffung von Fahrrad-Abstellplätzen im Außenbereich für B2B-Einkäufer

For outdoor-storage retailers, importers, distributors and project buyers

Outdoor bike storage should be selected around real bicycle dimensions, access movement and site constraints. Product labels such as shelter, shed or storage box are not enough to establish capacity, security, installation or channel fit.

Enclosed bike storage should be selected using bicycle dimensions, clear openings, lid movement and site space.

Short answer: how should businesses source outdoor bike storage?

Confirm bicycle count and dimensions, required enclosure level, front-door and lid movement, clear opening, site footprint, base and fixing interface, drainage/ventilation direction, lock scope, packaging and installation responsibility. Validate capacity with the intended bicycle mix instead of relying on a generic number.

Bauform	Best used when	Buyer checks
Open or semi-enclosed shelter	Fast access and covered parking are more important than full enclosure	Footprint, roof coverage, fixing points, access side and project responsibility
Enclosed shed/box	Weather separation, visual containment or controlled access is required	Door clear opening, lid movement, lock scope, ventilation and base
Shelter with storage zone	Bicycle parking and a separate tool/storage task are combined	Zone dimensions, door locations, circulation and package complexity

Measure the bicycle mix

Record the longest bicycle, widest handlebars and extensions such as baskets, child seats or carriers. State whether bicycles must roll in directly, turn inside or overlap. E-bikes can add handling considerations, but charging and electrical scope should not be assumed to be part of the storage product.

Enclosed bicycle storage shed with double front doors — Clear door width and height should be measured after frames, thresholds and door hardware are considered.

Control front access and lid clearance

Some enclosed products combine front doors with a lift-up lid. Confirm whether one or both doors open, the clear opening, hinge or track space, lid support method and the rear/overhead clearance required. A product that fits the footprint may still be impractical if doors or lids cannot move fully.

Separate security hardware from security claims

Record the handle, lock provision, door/lid interfaces and any anchoring or fixing points. Do not describe a product as theft-proof or assign a security rating without applicable evidence. The project buyer should define any site-level lock, foundation, surveillance or access-control requirements separately.

Outdoor bicycle storage enclosure with lift-up lid and front doors — Review lid supports, front access and the usable movement path together.

Review base, surface and installation

Clarify whether the product includes a base or floor, which fixing plates or anchors are included, what installation surface is required and who prepares it. The final anchoring solution depends on the product, site and local requirements.

Retail and project procurement need different files

Retail program: product images, dimensions, package data, assembly manual, parts identification, labels and consumer-facing claims.
Project program: site plan, bicycle mix, access route, fixing interface, installation responsibility and required technical documents.
Private label: approved specification, artwork, manual languages, carton labels and change-control records.

Bike-storage RFQ checklist

Target market, channel and installation setting.
Bicycle count, bicycle dimensions and accessories.
Open, covered or enclosed format.
Footprint, height limit and access side.
Door opening, lid operation and lock direction.
Base, floor, fixing and site-preparation scope.
Finish, branding, packaging and documentation.
Quantity range, destination and approval process.

Compare the LERYOU bike storage series and the wider outdoor storage range before requesting a quotation.

Häufig gestellte Fragen

Wie viele Fahrräder passen in einen Fahrradunterstand für den Außenbereich?

Die Kapazität hängt von der genauen Fahrradmischung, der Lenkerbreite, dem Zubehör, den Innenmaßen und dem Zugangsweg ab. Prüfen Sie die vorgesehene Mischung, statt eine pauschale Anzahl zu verwenden.

Ist ein aufklappbarer Deckel notwendig?

Not always. It can improve access to selected products, but the buyer must confirm overhead and rear clearance, support hardware and the relationship with front doors.

Does a lockable handle make the unit theft-proof?

No. Describe the supplied lock hardware accurately and evaluate anchoring, site security and any rating requirements separately.

What should a project buyer send for quotation?

Send the site, bicycle mix, capacity, footprint, access, enclosure, lock, base/fixing, finish, installation, document and delivery requirements.

Prepare an outdoor bike storage brief

Entdecken bike storage solutions, Rezension LERYOU – OEM/ODM- und Qualitätskontrollkompetenzen, oder send your bicycle mix, site dimensions, access, enclosure and project requirements.

Der Umfang der Inhalte wurde im September 2026 anhand der aktuellen Produktdaten von LERYOU überprüft. Die endgültigen Spezifikationen, die Verpackung, die Nachweise und der Lieferumfang müssen für das ausgewählte Produkt und den Zielmarkt bestätigt werden.